Developed in 2000, we’re amongst the leading tilers in Dublin. Consistency and quality are at the core of everything we do, enabling us to end up being among the most reliable tiling business in Dublin.

With years of tiling experience, our dynamic team have satisfied practically every tiling demand imaginable, developing lasting relationships with a host of suppliers & clients and crafting a service unlike any tiling company in Dublin. From small works to large-scale jobs, we position customer fulfillment and efficiency above all else, guaranteeing we provide on-time, in budget and to a high standard.

Easy DIY Tiling Tips for Amateurs

tilers dublin

Adding tile to your home is a fantastic method to update the look of an area. Whether you are tiling an entryway flooring, adding a little color to your kitchen with a backsplash, or tackling an overall restroom renovation, installing the tile yourself is absolutely nothing to be afraid of. With the right tools and a thoroughly laid-out plan, you’ll be impressed at what you can achieve. Simply follow these basic actions for a diy tiling task you make certain to enjoy.

  1. You’ll require to know how much tile you’ll need, so carefully determine your area and figure out the square video. Due to the fact that tiles come in numerous sizes, the overall square video is important to acquiring the right amount. Order an extra ten percent to represent any errors or cuts.
  2. For finest outcomes, set up backer-board (water resistant if it remains in a restroom) to the surface area that you will be tiling; it provides a smooth, even surface area for better tile adhesion. Utilize a light coat of glue or tile adhesive (ask your tile provider whether mastic or mortar will work best for you) and screws to attach it to the walls. Roll out a water resistant underlay (offered at home improvement shops) to cover the entire area that will be tiled if you are tiling a floor.
  3. Find the center of the area to be tiled and, using a level, draw one line horizontally and one line vertically to create quadrants of the location you’re tiling.
  4. When you have your tile design identified (attempt to avoid too many cuts and be aware of keeping the design centered), begin at the center of the area you marked, and spread out the tile adhesive onto the backer-board into among the quadrants in ten-square-foot sections utilizing a notched trowel. Continue to spread the adhesive until it is even and the notches appear as they help the tile abide by the wall.
  5. At the center point of the quadrant, begin laying the tiles horizontally, using mild pressure to press the tiles into the adhesive. For best results, place tile spacers in between each tile for an even layout. Utilize a level or A-square to make sure that the tiles are straight. Continue including adhesive and tiles, working toward the outer edge of the tile area.
  6. For tile pieces that are too big, use a snap cutter or wet saw to make straight cuts. If a tile requires to be notched or have a centerpiece cut out to accommodate an outlet, utilize a damp saw, being careful not to cut beyond the needed opening.
  7. Let the tile sit over night. Next, utilizing a trowel, use the grout to the tile, working from one corner to the opposite side of the area. Make sure to apply the grout liberally and evenly, ensuring that it actually completes the spaces in between all of the tiles.
  8. Allow the grout to dry for 30 minutes. When dry, remove the excess grout with a clean sponge.
  9. For finest outcomes, apply a tile sealant to prevent the grout from being stained or becoming subject to wetness.

Utilize a light coat of glue or tile adhesive (ask your tile provider whether mastic or mortar will work best for you) and screws to affix it to the walls. If you are tiling a floor, roll out a water resistant underlay (readily available at home improvement stores) to cover the entire area that will be tiled.
As soon as you have your tile style identified (attempt to avoid too many cuts and be conscious of keeping the style focused), begin at the center of the location you marked, and spread out the tile adhesive onto the backer-board into one of the quadrants in ten-square-foot sections using a notched trowel. At the center point of the quadrant, start laying the tiles horizontally, applying mild pressure to push the tiles into the adhesive. Continue adding adhesive and tiles, working towards the outer edge of the tile location.

Modern Tiling Videos

 

 

Learn More About Tiling

 

 

Related Articles

 

 

Modern Tiling Services

 

 

Around the Web

 

Call Now Button