WHY CHOOSE ModernTiling.ie

There are numerous tiling business in Dublin, but it’s constantly the most crucial to trust and choose. Your single click when searching for “local tilers near me” online or calling somebody over the phone can help you find a tiler in Dublin. Picking the right tiling system in Dublin can be a daunting job.

We are a certified and competent tiling firm in Dublin. Having a number of years of experience and competent commercial tilers in Dublin, we can mesmerize the look of your location with our lovely ceramic tiles.

How to Prepare a Wall for Tiling (Leading + detailed Tips).


Preparing your walls for a fresh wall tile setup is problem-free and basic with our no-nonsense guide at the ready.

You can set up new tiles on numerous surfaces, as long you prepare the wall properly. Just make sure the surface is level enough, and dust and dirt-free– and that there are no signs of residual wetness. When proper preparation is done, you can easily apply adhesive and stick your fresh tiles straight onto the wall.

How to get ready for tiling a wall:.

  • Remove old fittings, such as pins, screws, rivets etc
  • Repair or get rid of unsuited plaster.
  • If present), get rid of or pre-treat wallpaper (.
  • Repair any fractures or signs of damage.
  • Level the surface area.
  • Sand, so that the adhesive can bond.
  • Ensure the surface is grease-free, dirt and dust.
  • Pick the suitable guide for your type of surface.

Other important preparation to do prior to you get going:

  • Measure your square video footage.
  • Determine the variety of tiles required for the job.
  • Buy at least 10% more tiles in case of damage throughout the installation. If you will set up fragile patterns, you might wish to increase the amount to 20% or perhaps 30% additional. There are no warranties when it concerns finding the very same batch, and even one that will carefully resemble what you purchased, further down the line, so this is highly advised.

Make certain you have the ideal kind of adhesive.

According to the professional tradesmen from Wonderful Tilers, less skilled DIY enthusiasts can utilize the ready-mix kind of adhesive, but an expert tiler will constantly use the powdered service. It dries slower and thus permits you to better change and line up the whole wall tiling.

Useful pointer: When tiling kitchen splashbacks or wet spaces, or installing bathroom tiles in general, adhesive need to be water-resistant.

Ensure the wall is level or your tile setup may not succeed.

Tiling an uneven wall has the potential to lead to catastrophe. A simple method to find abnormalities is by positioning something long and flat (i.e. a regular slab) on the wall and moving it across. In this manner, you can determine any swollen locations or bumps, must they exist.

An unequal wall can avoid adhesive from sticking– which could cause your entire wall installation to collapse. According to professional tilers, anything between 3 and 6mm is still practical– however anything beyond that is likely to cause trouble.

Its grip may loosen– leading to undesirable problems even more down the line if you decide to use a somewhat thicker layer of adhesive to compensate.

Different surfaces require various methods of preparation.

Some surface areas, such as a fresh drywall, require a minimum of a month to properly dry. Other cases, such as when you’re tiling on wood, need a coat of polyurethane paint. Make sure you have the best option for your specific wall and, whenever in doubt, speak with an expert tiler.

Tile board backers are a terrific method to handle uneven surface areas with minimal effort.

A little more expensive, tile board backers can help you resolve the issue– not to point out that these items are resistant to moisture, and can effectively avoid mould (which is known to grow on porous materials in warm, damp conditions). This benefit makes tile backer boards a practical option for areas, bathrooms and showers surrounding the kitchen sink.

The one drawback of tile backer boards is that making use of such items will make your fresh tile installation a bit more expensive.

Handy idea: One vital thing to make sure of here is that the boards are tough and well-mounted.

Can you set up new tiles on top of old tiles?

Tiling over old tiles is possible– however it’s always better to remove and retile.

Many tiles are too smooth for adhesive to correctly bond and, in these cases, extra treatment is needed. Depending on the toolkit you have at hand, you might either try a sander (with medium to coarse sandpaper) or a grinding disc. You should, however, show extra care so as not to harm the integrity of your old tiling.

Essential: Always examine for void behind old tiles. To do this, merely knock on each piece with your hand and listen out for hollow sounds. Locations with hollow area are easy to spot, but beware– if you fail to identify these and tile over them anyway, you run the risk of having your fresh tiles collapse in the reasonably future.

tiling tools

What tools will I require for a DIY tile installation?

  • Paintbrush.
  • Paint roller.
  • Liquid waterproofing membranes (or plastic sheets).
  • Regular utility knife.
  • Stapler.
  • Mask and protective glasses (to keep you safe from heavy particles).
  • Gloves.
  • Straight edge (or a similar tool).
  • Pencil.
  • Determining tape.
  • Drill.
  • Pins (to support the tile up until the adhesive bonds and dries off).
  • Level.

Crucial: Ensure your surface area is constantly dust, dirt and moisture-free or there’s a possibility your adhesive might not effectively bond.

For the majority of types of masonry, ceramic and vinyl tiles will stick– but for wooden surfaces, you’ll require to apply a coat of paint or prime.

How do I prep drywall for a fresh tile setup?

Fresh drywall requires approximately a month prior to it’s ready for tiling, however when the time comes, you won’t need to tape the joints. All you’ll require to do is use a skim coat and sand. As soon as done, tidy the surface from dust, dry any indications of wetness and use the adhesive.

Important: For locations abundant with wetness, usage waterproof plasterboard.

How do I prep old drywall for a fresh tile installation?

It’s essential to appropriately examine whether the wall is steady and strong enough to hold the weight of fresh tiling. You must always ask for advice from an experienced tiler if you’re not sure.

Fill out any fractures or holes from pins, nails or any other type of wall fitting, use the guide, leave it to dry, sand one more time, and then use the adhesive.

How do I prep the wall for tiles if the drywall is currently painted or textured?

According to experts, you need to apply PVA or make a DIY guide by including a bit more water to your adhesive.

After that, there are a few crucial tasks to take care of:.

  • Remove diminished paint.
  • Repair cracks and holes.
  • Sand if bumps exist.
  • Clean the surface.
  • Ensure there are no signs of oil or grease.

Helpful suggestion: Treat the wall with Trisodium Phosphate (TSP). It’s an effective cleaner, stain eliminator and degreaser– but keep in mind that this should, of course, be kept well away from kids.

How do I prep a plywood surface area for fresh tiling?

When it comes to walls, the reality is that plywood is appropriate for tiling your floorings however not as practical. The material is made of compressed wood blended with numerous oils, which implies that heat can impact it. If exposed to significant and regular modifications in temperature, tiles and grout will likely split.

How do I prep a wallpapered wall for tiling?

When it concerns walls, tiles offer even more durability and usefulness than wallpaper, and the best alternative is to eliminate wallpaper any place possible. The most effective and hassle-free method is by exposing the space to steam– however this method does feature some dangers. If you’re treating drywall or engineered wood via steam, the heats and wetness can possibly trigger damage which is typically beyond simple repair work.

Additionally, you can merely wipe the surface area with a warm and wet rag. This way, moisture won’t penetrate through to the substrate itself– but at the same time, the wallpaper will chill out. Repeat the procedure a couple of times and use a scraper to peel whatever with minimal effort.

When done, all you’ll need to do prior to applying guide or adhesive is to ensure the surface is clean and dry.

You can install new tiles on different surface areas, as long you prepare the wall properly. When proper preparation is done, you can quickly apply adhesive and stick your fresh tiles straight onto the wall.

Locations with hollow space are easy to spot, however beware– if you stop working to spot these and tile over them anyhow, you run the threat of having your fresh tiles collapse in the relatively near future.

The truth is that plywood is appropriate for tiling your floors but not as practical when it comes to walls. When it comes to walls, tiles offer far more longevity and practicality than wallpaper, and the finest choice is to remove wallpaper any place possible.

Watch this video and learn how to tile kitchen wall

Tilers (WikiPedia)

Tiles are usually thin, square or rectangular coverings manufactured from hard-wearing material such as ceramic, stone, metal, baked clay, or even glass. They are generally definite in place in an array to lid roofs, floors, walls, edges, or further objects such as tabletops. Alternatively, tile can sometimes speak to to same units made from lightweight materials such as perlite, wood, and mineral wool, typically used for wall and ceiling applications. In substitute sense, a tile is a construction tile or thesame object, such as rectangular counters used in playing games (see tile-based game). The word is derived from the French word tuile, which is, in turn, from the Latin word tegula, meaning a roof tile composed of afire clay.

Tiles are often used to form wall and floor coverings, and can range from simple square tiles to obscure or mosaics. Tiles are most often made of ceramic, typically glazed for internal uses and unglazed for roofing, but further materials are also commonly used, such as glass, cork, concrete and other composite materials, and stone. Tiling stone is typically marble, onyx, granite or slate. Thinner tiles can be used on walls than on floors, which require more durable surfaces that will resist impacts.

Related Articles (Tilers)

Our Services

Around The Web(Tilers)

Call Now Button