There are numerous tiling business in Dublin, but it’s constantly the most essential to trust and choose. Your single click when searching for “regional tilers near me” online or calling somebody over the phone can help you discover a tiler in Dublin. Selecting the right tiling system in Dublin can be a daunting job. The problem is who to contact the Dublin tiling facilities. Don’t believe all of you blindly. Modern Tiling might be the ideal option for your tiling requires.

We are a licensed and certified tiling agency in Dublin. Having a number of years of experience and experienced industrial tilers in Dublin, we can enthrall the appearance of your place with our beautiful ceramic tiles.

How to Prepare a Wall for Tiling (Top + step-by-step Tips).


Preparing your walls for a fresh wall tile setup is problem-free and basic with our no-nonsense guide ready.

You can install brand-new tiles on various surface areas, as long you prepare the wall appropriately. Simply make sure the surface area is level enough, and dust and dirt-free– which there are no signs of recurring moisture. When appropriate preparation is done, you can easily use adhesive and stick your fresh tiles straight onto the wall.

How to prepare for tiling a wall:.

  • Get rid of old fittings, such as pins, screws, rivets and so on
  • Repair work or get rid of unfit plaster.
  • Get rid of or pre-treat wallpaper (if present).
  • Repair any cracks or signs of damage.
  • Level the surface.
  • Sand, so that the adhesive can bond.
  • Make certain the surface area is grease-free, dust and dirt.
  • Select the appropriate guide for your type of surface area.

Other important planning to do before you get started:

  • Procedure your square footage.
  • Determine the variety of tiles needed for the task.
  • Purchase least 10% more tiles in case of breakage throughout the installation. You might wish to increase the quantity to 20% or even 30% extra if you’re about to install delicate patterns. There are no guarantees when it pertains to finding the very same batch, and even one that will carefully resemble what you purchased, further down the line, so this is extremely recommended.

Make sure you have the best type of adhesive.

According to the professional tradesmen from Wonderful Tilers, less knowledgeable DIY lovers can use the ready-mix type of adhesive, however an expert tiler will always use the powdered solution. It dries slower and hence allows you to much better adjust and align the whole wall tiling.

Practical tip: When tiling kitchen splashbacks or wet spaces, or installing restroom tiles in general, adhesive must be waterproof.

Make certain the wall is level or your tile installation might not succeed.

Tiling an uneven wall has the potential to lead to catastrophe. A simple method to find irregularities is by placing something long and flat (i.e. a regular slab) on the wall and sliding it across. By doing this, you can recognize any swollen locations or bumps, must they exist.

An irregular wall can prevent adhesive from sticking– which might trigger your entire wall installation to collapse. According to professional tilers, anything between 3 and 6mm is still convenient– but anything beyond that is likely to cause trouble.

Its grip may loosen– leading to undesirable issues even more down the line if you choose to apply a slightly thicker layer of adhesive to compensate.

Various surface areas require various means of preparation.

Some surface areas, such as a fresh drywall, need a minimum of a month to appropriately dry. Other cases, such as when you’re tiling on wood, require a coat of polyurethane paint. Ensure you have the right option for your particular wall and, whenever in doubt, consult with a professional tiler.

Tile board backers are a fantastic method to handle uneven surface areas with minimal effort.

Although somewhat costlier, tile board backers can help you fix the problem– not to mention that these items are resistant to moisture, and can effectively avoid mould (which is known to grow on porous products in warm, wet conditions). This benefit makes tile backer boards a practical solution for showers, bathrooms and areas surrounding the kitchen sink.

The one drawback of tile backer boards is that using such items will make your fresh tile setup a bit more pricey.

Handy suggestion: One crucial thing to make certain of here is that the boards are sturdy and well-mounted.

Can you set up new tiles on top of old tiles?

Tiling over old tiles is possible– however it’s always better to remove and retile.

The majority of tiles are too smooth for adhesive to correctly bond and, in these cases, additional treatment is needed. Depending upon the toolkit you have at hand, you could either attempt a sander (with medium to coarse sandpaper) or a grinding disc. You should, nevertheless, show additional caution so as not to damage the integrity of your old tiling.

Essential: Constantly examine for void behind old tiles. To do this, merely knock on each piece with your hand and listen out for hollow sounds. Locations with hollow space are easy to spot, but beware– if you stop working to spot these and tile over them anyhow, you risk of having your fresh tiles collapse in the relatively near future.

tiling tools

What tools will I require for a DIY tile installation?

  • Paintbrush.
  • Paint roller.
  • Liquid waterproofing membranes (or plastic sheets).
  • Routine energy knife.
  • Stapler.
  • Mask and protective glasses (to keep you safe from heavy particles).
  • Gloves.
  • Straight edge (or a comparable tool).
  • Pencil.
  • Determining tape.
  • Drill.
  • Pins (to support the tile up until the adhesive bonds and dries off).
  • Level.

Important: Ensure your surface area is always dust, dirt and moisture-free or there’s a possibility your adhesive might not properly bond.

For most types of masonry, ceramic and vinyl tiles will stick– but for wooden surface areas, you’ll require to use a coat of paint or prime.

How do I prep drywall for a fresh tile installation?

Fresh drywall needs as much as a month prior to it’s ready for tiling, but when the time comes, you won’t need to tape the joints. All you’ll require to do is apply a skim coat and sand. As soon as done, tidy the surface from dust, dry any signs of moisture and apply the adhesive.

Crucial: For areas abundant with wetness, usage waterproof plasterboard.

How do I prep old drywall for a fresh tile setup?

It’s vital to effectively assess whether the wall is strong and stable adequate to hold the weight of fresh tiling. If you’re uncertain, you must constantly request guidance from a skilled tiler.

Fill in any fractures or holes from pins, nails or any other kind of wall fitting, apply the guide, leave it to dry, sand one more time, and then use the adhesive.

How do I prep the wall for tiles if the drywall is currently painted or textured?

According to professionals, you should use PVA or make a DIY guide by including a bit more water to your adhesive.

After that, there are a few essential tasks to take care of:.

  • Eliminate diminished paint.
  • Repair cracks and holes.
  • If bumps are present, sand.
  • Clean the surface area.
  • Make certain there are no indications of oil or grease.

Valuable tip: Treat the wall with Trisodium Phosphate (TSP). It’s an effective cleaner, stain eliminator and degreaser– but bear in mind that this should, naturally, be kept well away from kids.

How do I prep a plywood surface for fresh tiling?

The reality is that plywood is suitable for tiling your floors however not as practical when it comes to walls. The material is made from compressed wood mixed with various oils, which means that heat can affect it. , if exposed to dramatic and frequent significant in remarkable, regular and grout will likely crack.

How do I prep a wallpapered wall for tiling?

When it pertains to walls, tiles provide even more longevity and practicality than wallpaper, and the very best choice is to get rid of wallpaper wherever possible. The most problem-free and effective method is by exposing the room to steam– however this method does include some risks. The high temperatures and wetness can potentially trigger damage which is typically beyond basic repair work if you’re dealing with drywall or engineered wood via steam.

You can simply wipe the surface area with a warm and damp rag. By doing this, moisture won’t permeate through to the substrate itself– however at the same time, the wallpaper will chill out. Repeat the procedure a couple of times and utilize a scraper to peel whatever with very little effort.

Once done, all you’ll require to do prior to using guide or adhesive is to make sure the surface area is dry and tidy.

You can install new tiles on various surface areas, as long you prepare the wall appropriately. When appropriate preparation is done, you can easily use adhesive and stick your fresh tiles straight onto the wall.

Areas with hollow space are simple to identify, however beware– if you fail to spot these and tile over them anyhow, you run the risk of having your fresh tiles collapse in the fairly near future.

The reality is that plywood is ideal for tiling your floorings however not as useful when it comes to walls. When it comes to walls, tiles use far more durability and usefulness than wallpaper, and the best choice is to eliminate wallpaper any place possible.

Watch this video and learn how to tile kitchen wall

Tilers (WikiPedia)

Tiles are usually thin, square or rectangular coverings manufactured from hard-wearing material such as ceramic, stone, metal, baked clay, or even glass. They are generally unmovable in place in an array to lid roofs, floors, walls, edges, or further objects such as tabletops. Alternatively, tile can sometimes deal with to thesame units made from lightweight materials such as perlite, wood, and mineral wool, typically used for wall and ceiling applications. In other sense, a tile is a construction tile or thesame object, such as rectangular counters used in playing games (see tile-based game). The word is derived from the French word tuile, which is, in turn, from the Latin word tegula, meaning a roof tile composed of ablaze clay.

Tiles are often used to form wall and floor coverings, and can range from easy square tiles to puzzling or mosaics. Tiles are most often made of ceramic, typically glazed for internal uses and unglazed for roofing, but extra materials are afterward commonly used, such as glass, cork, concrete and extra composite materials, and stone. Tiling rock is typically marble, onyx, granite or slate. Thinner tiles can be used upon walls than upon floors, which require more durable surfaces that will resist impacts.

Related Articles (Tilers)

Our Services

Around The Web(Tilers)

Call Now Button